232 Cannot perform clipboard operations on a compressed wave.\nPlease turn the compression setting off and try again.
233 Do you want to copy the waves used by this instrument?
234 The regions in the instrument will be mapped to the existing waves in this collection.
235 The instrument cannot be moved.\nThere are no waves in this collection.
236 Please enter a valid loop start value.
237 Cannot create an instrument without any waves in the collection.\nYou can insert a wave into the collection by right clicking on the Waves folder\nin the project tree or by dragging a wave into the Waves folder.
238 Loop values exceed the wavelength.
239 Collection is not DLS-1 compatible.
240 Instruments %s and %s have the same address.
241 Instrument %s has overlapping regions.
242 Drum Kit %s has %ld regions, the maximum for a drum kit is 128.
243 Instrument %s has %ld regions with local articulations.
244 Instrument %s has no regions.
245 Instrument %s has no global articulation.
246 Instrument %s has %ld regions, the maximum for a melodic instrument is 16.
247 The collection is DLS-1 compatible.
248 The wave file is compressed with an unknown compression format.\nThe wave file will be loaded as uncompressed.
249 A wave (%s) in this DLS collection is compressed with an unrecognized compression format.\nPlease try loading this DLS collection after installing the necessary codecs for this compression format.
250 Too many wave files selected for insert.\nPlease try again after selecting fewer wave files.
251 Failed to insert %s as a wave file.
252 The value for loop start exceeds or is within 5 samples of the total wave length.\nPlease enter a smaller value.
253 Please enter a value between 0 and 127.
254 Could not query the synth port for information necessary for the download.\nThis could be a problem with your soundcard drivers.
255 Collection could not be downloaded.\nThe DLS file may be corrupt or your hardware settings may have a problem.
256 Collection could not be downloaded.\nYou may have insufficient memory on the output device %s to load this collection.
257 Are you sure you want to replace this wave?
258 Continue checking for DLS-1 compatibility?
259 Please select a loop length greater than 5.
260 Cannot delete regions from a compressed wave.\nPlease turn the compression setting off and try again.
261 Not enough resources to complete this action.\nPlease close one or more other applications and try again.
262 Not enough memory to download all the waves in this collection.\nPlease try reloading this collection after closing one or more other applications.
263 Not enough memory to download all the instruments in this collection.\nPlease try reloading this collection after closing one or more other applications.
264 DLS Collection
265 Wave
266 Unable to find a port in the current configuration that supports DLS. DLS instruments will be unavailable for playback.
267 No Wave
268 DLS collections cannot handle stereo compression formats. The wave(s) will be imported without compression; you may wish to compress the wave again using mono formats (applied to left and right channels).
269 Cannot set this region as DLS1 region.\nThe range for this region conflicts with region %s
270 GMInHardware
271 GSInHardware
272 XGInHardware
273 SupportsDLS1
274 SupportsDLS2
275 SampleMemorySize
276 ManufacturersID
277 ProductID
278 SamplePlaybackRate
279 Unknown Query - %s
280 Unknown Operator - %s
281 <None>
282 Queries
283 Preset Conditions
284 Operators
285 Could not parse the condition script.\nPlease check your expression for errors.
286 Articulations List
287 DLS Conditions (Audition)
288 &DLS Conditions (Audition)
289 Show or hide the DLS Conditions (Audition) toolbar
290 MS Sans Serif
291 For boolean queries (e.g. SupportsDLS1), non-zero values are interpreted as "true".\nFor non-boolean queries (e.g. SampleMemorySize), values are treated as constants.
292 There's already a configuration by this name.\nPlease assign a different name to this configuration.
293 You must give a name to this configuration.
294 You cannot edit the default configurations.\nClick on the "Add" button to add new configurations or select a non-default configuration to modify it.
295 A Query by this name is already defined.\nPlease give this query another name.
296 &
297 |
298 ^
299 +
300 -
301 *
302 /
303 &&
304 ||
305 <
306 <=
307 >
308 >=
309 ==
310 !
311 ?
312 (Bitwise AND)
313 (Bitwise OR)
314 (Bitwise XOR)
315 (Add)
316 (Subtract)
317 (Multiply)
318 (Divide)
319 (Logical AND)
320 (Logical OR)
321 (Less Than)
322 (Less Than Or Equals)
323 (Greater Than)
324 (Greater Than Or Equals)
325 (Equals)
326 (Not)
327 (Is Query Supported)
328 DLS-2 does not support waves using stereo compression. Please uncompress the wave before adding it to a DLS collection.Within Producer, you can do this by inserting it into a project, unchecking the box in the Compression tab of the wave's property page, and then dragging the wave into the DLS collection's wave folder.
329 Missing %s in the expression
330 Streaming
331 Read Ahead Time
332 Could not load the waves in this collection. They may be using an unknown compression.\nPlease make sure the proper codec is installed on your computer, or uncompress the\nwaves in this DLS collection before loading it into DirectMusic Producer.
333 Could not load some waves in this collection. They will be removed from the designtime file.\nThese waves may have been using an unknown compression. Please make sure the proper codec\nis installed on your computer, or uncompress these waves before loading them into DirectMusic Producer.
334 Insert Wave Files into Collection
335 Left (or Mono)
336 Right
337 Center
338 Low Frequency Energy
339 Surround Left
340 Surround Right
341 Left of Center
342 Right of Center
343 Surround Center
344 Side Left
345 Side Right
346 Top
347 Top Front Left
348 Top Front Center
349 Top Front Right
350 Top Rear Left
351 Top Rear Center
352 Top Rear Right
353 There is another Phase Master region in this Phase Group. You can have one and only one region in the same phase group as the master.\nClick OK to replace that region as the master in this phase group with this region.
354 Phase Group
355 Phase Group ID
356 Phase Group Master
357 Multichannel
358 Channel Setting
359 You cannot delete a default configuration.
360 This wave may not play correctly as the Microsoft Software Synthesizer does not support waves that don't have a sample rate between 3 kHz and 80 kHz.
361 Loops of more than 524,287 samples may not play correctly when using MS Software Sythesizer.\nDo you want to continue?
362 Condition
363 This wave (%s) is compressed with an unrecognized compression format.\nPlease try loading this wave after installing the necessary codecs for this compression format.
364 Delete Layer
365 Insert Layer
366 Modify Loop
367 Stereo
368 Please enter a valid sample rate between 3072 Hz and 81920 Hz.
369 %1!d! Hz, 4 Bit, Mono
370 %1!d! Hz, 4 Bit, Stereo
371 Don't Preroll
32779 Select the entire document\nSelect All
32818 Display help contents
32819 Instrument: %s- %s
32820 Wave: %s%s
32821 Region: %s - %s - %s
57344 DLS Designer
57346 Move Region
57347 Delete Region
57348 Insert Region
57349 Use Instrument Articulation
57350 Delete Articulation
57351 Insert Articulation
57352 Loop Points
57353 Override Wave Settings
57354 Allow Sample Trucation
57355 Allow Sample Compression
57356 Play Back Settings
57357 Override Attenuation
57358 Override Fine Tune
57359 Override Root Note
57360 Attenuation
57361 Fine Tune
57362 Root Note
57363 Compression
57364 Comments
57365 Subject
57366 Author
57367 Copyright
57368 Name Change
57369 Author
57370 Delete Selection
57371 Loop Copy
57372 Fade In
57373 Fade Out
57374 Velocity Range Edit
57375 Delay Time Edit
57376 Hold Time Edit
57377 Delete Articulation
57378 Key To Hold Edit
57379 Shutdown Time Edit
57380 Vib LFO Freq Edit
57381 Vib LFO Delay Edit
57382 Vib LFO Pitch Range Edit
57383 Vib LFO MW to Pitch Edit
57384 Vib LFO Chan. Press. to Pitch Edit
57385 Mod LFO Chan. Press. to Pitch Edit
57386 Mod LFO Chan. Press. to Gain Edit
57387 LFO Chan. Press. to Fc Edit
57388 Insert Articulation List
57389 Filter Initial Fc
57390 Filter Initial Q
57391 Filter LFO To Fc
57392 Filter LFO CC1 To Fc
57393 Filter Env2 To Fc
57394 Filter Key Vel To Fc
57395 Filter KeyNumber To Fc
57396 Invalid sample size.\nDLS Designer requires waves to have 8 or 16 bit samples.
57397 Loop Type
57398 Cannot delete the default layers.
57399 Cannot delete layers that have contained regions.
57400 Producer.pol
57401 Configuration file successfully exported.
57402 Could not export the configurations.
57403 Could not import the configurations.
57404 Configuration successfuly imported.
57405 Find Best Loop End
57406 DLS1
57407 Insert Matching Stereo Region
57408 Set Decompressed Start
57409 Insert Silence
57410 Resample
57644 Unable to find a port in the current configuration that supports DLS.\nWaves and DLS instruments will be unavailable for playback.\nTry selecting a different default audiopath from the toolbar.
57645 IDMUSProdComponent::Initialize() received invalid arguments.
57646 Instrument
57647 Region
57648 DLS Collection
57649 Wave
57650 Articulation
57651 DLS Designer, Version %1
57652 Loop values exceed wavelength.
57653 Enter a valid Midi Note.
57654 There are no waves in the collection. This operation is not allowed.
57655 Please enter a loop length greater than 5.
57656 Key Group Select
57657 LSB Edit
57658 MSB Edit
57659 &Undo
57660 &Redo
57661 Ctrl+Z
57662 Ctrl+Y
57663 Patch Edit
57664 Note Range Edit
57665 Root Note Edit
57666 DAHDSR Edit
57667 Pan Edit
57668 Velocity to Attack Edit
57669 Key to Decay Edit
57670 Attack Time Edit
57671 Decay Time Edit
57672 Sustain Level Edit
57673 Release Time Edit
57674 Range Edit
57675 Modulator LFO Freq Edit
57676 Modulator LFO Delay Edit
57677 LFO Volume Edit
57678 LFO Pitch Edit
57679 MW to Vol Edit
57680 MW to Pitch Edit
57681 Drums
57682 Note Overlap
57683 Cannot paste wave data. Please select a smaller amount of data.
57684 Wave file has incorrect number of channels.\nDirectMusic Producer can load only mono and stereo waves.
57685 Cut
57686 Paste
57687 Wave %s is currently referenced by %s\n\n
57688 Confirm Wave Delete
57689 Are you sure you want to delete this wave?
57690 The sampling rate of the wave data being pasted does not match the sampling rate of the destination wave.\nThe pasted data may play at a different speed and pitch than the source.
57691 Wave file cannot be opened. It is not in PCM format.
57692 Entry is limited to 127 characters.
57693 Instrument: %d, %d, %d
57694 %s: %d, %d, %d
57695 : Drum Kit
57696 Unable to create DirectMusic object.\nPlease install DirectMusic.
57697 No Collection
57698 Buffer allocation failed in update.
57699 Download Failed in Update.
57700 Instrument Size returned 0
57701 Buffer allocation failed in DM initialization
57702 Failed to get ID from DirectMusic
57703 Failed to get a pointer to download buffer
57704 Write to download buffer failed
57705 Bad wave data
57706 Wave is not in PCM format
57707 Wave is not mono
57708 Bad articulation
57709 Bad Region
57710 Bad link from region to wave
57711 Bad instrument
57712 Region has no articulation
57713 Region has no wave
57714 Unknown Error downloading to DirectMusic synthesizer
57715 Initial Download failed
57716 Wave Size returned 0;
57717 An instrument being loaded has a patch number that conflicts with
57718 another instrument loaded from the same collection.
57719 an instrument loaded from another collection.
57720 a General MIDI (GM) patch.
57721 The patch assignment you are attempting to make conflicts with
57722 Do not warn about GM conflicts in this instrument
57723 Do not warn about collection conflicts in this instrument
57724 Do not warn about collection conflicts in this instrument
57725 Are you sure you want to delete instrument "%s"?